ZG115F（2C Type）

2 groups of normally open contacts 8A / 277V contact switching 5KV Between Coil and Contact 10KV Initial Impulse voltage

Contact Type：2C Coil type：Monostable Encapsulation Form：Flux-proof, sealed Overall Dimension：28.9 ×12.6×15.4

Features
● 2 groups of normally open contacts
● 8A / 277V contact switching
● 5KV Between Coil and Contact
● 10KV Initial Impulse voltage

Coil Parameters

Coil Power(W)		400mW
Nominal Voltage		3/5/6/9/12/18/24/48VDC

Contact Parameters

Contact Type		2C
Contact Material		Silver alloy
Contact Resistance		≤ 100mΩ (1A/6VDC)
Contact Load		NO. 8A/277VAC ； 1/4HP 120VAC; TV-5 250VAC； NC. 4A/277VAC Note: TV-5 load refers to the inrush current that meets in the overload test 111A/20ms）

Technic Parameters

Insulation Resistance		1000MΩ (500VDC)
Dielectric Strength	Disconnect The Contact	1kV，1min
	Coil & Contact	5kV，1min
Impulse Voltage(initial)		10kV（1.2×50μs）
Electrical Endurance		1×10⁵ times
Mechanical Endurance min		1×10⁷ times
Ambient Temperature		-40 ~ 105℃
Enclosure Type		Flux-proof, sealed
Terminal Type		PCB board，There are two types of terminals, 3.5/5.04mm
Layout And Diagram
Approved Standards		cULus, TUV, CQC, VDE
Weight Appro（g）		14